المان سرد کننده TEC1-12715 15A

المان سرد کننده دارای کاربرد بسیار زیادی در صنایع گوناگون است که از جمله موارد استفاده آن می توان عناوین زیر را ذکر نمود: در اتومبیل و خانه برای ساخت یخچال 12 ولتی ، کلمن ، آب سرد کن ، کولر و ... در امور پزشکی ، آزمایشگاهی ، داروئی و لابراتوارها و ... در صنایع نظامی ، فضائی ، هواپیمائی و ... در صنایع الکترونیک و کامپیوتر و مخابرات ... بعنوان سرد کننده قطعات و هیت سینکهای قطعات مثل ترانزیستورها و دیودها و آی سی های پاور و قدرت و CPU کامپیوتر و ... برای استفاده عملی از این قطعه ، نیاز به لوازم جانبی زیر خواهید داشت : هیت سینک بزرگ مخصوص برای اتصال به قسمت داغ جهت دفع حرارت فن دور بالا و مخصوص برای اتصال به هیت سینک جهت خنک کردن آن قطعه آلومینیمی واسط مخصوص برای اتصال به قسمت سرد جهت انتقال سرما خمیر سیلیکونی مرغوب جهت انتقال هر چه بیشتر سرما و گرما از TEC Description The TEC1-12715 40x40mm Thermoelectric Cooler 15A Peltier Module is the simple application of Peltier Thermoelectric Effect. The module features 127 semiconductor couples in the area of 40mmx40mm. Thermoelectric coolers also are known as TEC or Peltier Module create a temperature differential on each side. One side gets hot and the other side gets cool. Therefore, they can be used to either warm something up or cool something down, depending on which side you use. You can also take advantage of a temperature differential to generate electricity. This Peltier works very well as long as you remove the heat from the hot side. After turning on the device, the hot side will heat quickly, the cold side will cool quickly. If you do not remove the heat from the hot side (with a heat sink or other device), the Peltier will quickly reach stasis and do nothing. We recommend using an old computer CPU heatsink or another block of metal to pull heat from the hot side. We were able to use a computer power supply and CPU heatsink to make the cold side so uncomfortable we could not hold our finger to it. A thermoelectric cooling (TEC) module is a semiconductor-based electronic component that functions as a small heat pump. By applying the DC power source to a TEC, heat will be transferred from one side of the module to the other. It creates a cold and hot side. They are widely used in industrial areas, for example, computer CPU, CCDs, portable refrigerators, medical instruments, and so on. Also Known as Thermoelectric cooling modules, Thermoelectric modules, Peltier modules, Thermoelectric cooling module. Operating Tips: Do not exceed Imax or Vmax when operating module. Please carry out moisture protection options (sealing) in final application use. Life expectancy: 200,000 hours. Failure rate based on longtime testings: 0.2%. feature: Model number: TEC1-12715 Operating Voltage: 12V Maximum Voltage- Umax (V) : 15V Maximum Current- Imax (A) : 15A Maximum Power : 230 W Power Cord: 100mm Quality tested cooling cells. Solid state, vibration free, noise-free. Simple to install and operate.